Aruba 575EX Outdoor Access Points

Specifications

AP-575EX

Built in Omni Directional Antennas

5 GHz Antennas 5dBi

2.4GHz Antennas 3.4dBi

BLE/Zigbee: Integrated omnidirectional antenna and the peak gain of 6dBi

WI-FI RADIO SPECIFICATIONS

AP type: Outdoor Hardened, Wi-Fi 6 dual radio, 5 GHz 4×4 MIMO and 2.4 GHz 2×2 MIMO
Software-configurable dual radio supports 5 GHz (Radio 0) and 2.4 GHz (Radio 1)

5 GHz: Four spatial stream Single User (SU) MIMO for up to 4.8 Gbps wireless data rate to individual 4SS HE160 Wi-Fi 6 client device (max)

Two spatial stream Single User (SU) MIMO for up to 1.2 Gbps wireless data rate to individual 2SS HE80 Wi-Fi 6 client device (typical)

Four spatial stream Multi User (MU) MIMO for up to 4.8 Gbps wireless data rate to up to four 1SS or two 2SS HE160 Wi-Fi 6 DL-MU-MIMO capable client devices simultaneously (max)

Four spatial stream Multi User (MU) MIMO for up to 2.4 Gbps wireless data rate to up to four 1SS or two 2SS HE80 Wi-Fi 6 DL-MU-MIMO capable client devices simultaneously (typical)

2.4GHz radio: Two spatial stream Single User (SU) MIMO for up to 575 Mbps wireless data rate to individual 2SS HE40 Wi-Fi 6 client device (max)

Two spatial stream Single User (SU) MIMO for up to 287 Mbps wireless data rate to individual 2SS HE20 Wi-Fi 6 client device (typical)

Support for up to 512 associated client devices per radio, and up to 16 BSSIDs per radio

Supported frequency bands (country-specific restrictions apply):

2.400 to 2.4835 GHz  

5.150 to 5.250 GHz    

5.250 to 5.350 GHz    

5.470 to 5.725 GHz  

5.725 to 5.850 GHz    

5.850 to 5.925 GHz

5.825 to 5.875 GHz

Available channels: Dependent on configured regulatory domain

Dynamic frequency selection (DFS) optimizes the use of available RF spectrum

Supported radio technologies:

802.11b: Direct-sequence spread-spectrum (DSSS)

802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)

802.11ax: Orthogonal frequency-division multiple access (OFDMA) with up to 16 resource units (RU)

Supported modulation types:

802.11b: BPSK, QPSK, CCK

802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM (proprietary extension)

802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM,1024 QAM (proprietary extension)

802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM and 1024-QAM

802.11n high-throughput (HT) support: HT20/40

802.11ac very high throughput (VHT) support: VHT 20/40/80/160

802.11ax high efficiency (HE) support: HE20/40/80/160

Supported data rates (Mbps) :

802.11b: 1, 2, 5.5, 11

802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54

802.11n (2.4GHz): 6.5 to 300 (MCS0 to MCS15, HT20 to HT40)

802.11n (5GHz): 6.5 to 600 (MCS0 to MCS31, HT20 to HT40)

802.11ac: (5 GHz): 6.5 to 3,467 (MCS0 to MCS9, NSS = 1 to 4 for VHT20 to VHT160)

802.11ax (2.4GHz): 8.6 to 574 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE40)

802.11ax (5GHz): 8.6 to 4803 (MCS0 to MCS11, NSS = 1 to 4, HE20 to HE160)

802.11n/ac packet aggregation: A-MPDU, A-MSDU

Transmit power: Configurable in increments of 0.5 dBm

Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements):

2.4 GHz band: +22 dBm per chain, +25dBm aggregate (2×2)

5 GHz band: +22 dBm per chain, +28dBm aggregate (4×4)

Note: conducted transmit power levels exclude antenna gain.

Maximum EIRP (limited by local regulatory requirements):

2.4 GHz band:  29.0 dBm EIRP

5 GHz band:     32.6 dBm EIRP

Advanced Cellular Coexistence (ACC) minimizes the impact of interference from cellular networks

Maximum ratio combining (MRC) for improved receiver performance

Cyclic delay/shift diversity (CDD/CSD) for improved downlink RF performance

Space-time block coding (STBC) for increased range and improved reception

Low-density parity check (LDPC) for high-efficiency error correction and increased throughput

Transmit beam-forming (TxBF) for increased signal reliability and range

Short guard interval for 20-MHz, 40-MHz, 80-MHz and 160-MHz channels.

ADDITIONAL INTERFACES

E0: HPE SmartRate port (RJ-45)

Auto-sensing link speed (100/1000/2500BASE-T) and MDI/MDX

2.5Gbps speed complies with NBase-T and 802.3bz specifications

PoE-PD: 48Vdc (nominal) 802.3at/bt (Class 4 or higher)

802.3az Energy Efficient Ethernet (EEE)

E1: 100/1000BASE-T (RJ-45)

Auto-sensing link speed and MDI/MDX

802.3az Energy Efficient Ethernet (EEE)

PoE-PD: 48Vdc (nominal) 802.3at/bt (Class 4 or higher)

Link Aggregation (LACP) support between both network ports for redundancy and increased capacity

Bluetooth 5 and 802.15.4 radio

2.4 GHz

Bluetooth 5: up to 8dBm transmit power and -95dBm receive sensitivity

Zigbee: up to 8 dBm transmit power and -97dBm receive sensitivity

Up to 4dBm transmit power (class 2) and -91 dBm receive sensitivity

Visual indicator (multi-color LED): For system and radio status

Reset button: Factory reset (during device power up)

USB-C console interface

POWER SOURCES AND POWER CONSUMPTION

Maximum (worst-case) power consumption:

POE powered (dual ports): 32.0W

POE powered (single port, full function): 26.1W

Maximum (worst-case) power consumption in idle mode: 14.0W (single POE) or 16.0W (dual POE)

Maximum (worst-case) power consumption in deep-sleep mode: 2.9W (single POE) or 3.9W (dual POE)

The AP supports Power over Ethernet (POE; on port E0 and/or E1)

When POE power is supplied to both Ethernet ports, the AP can be configured to combine or prioritize power sources

Power sources are sold separately; see the ordering Information section below for details

When powered by 1x 802.3at (class 4) POE and with the IPM feature disabled, the AP will disable the other Ethernet port. In the same configuration but with IPM enabled, the AP will start up in unrestricted mode, but may dynamically apply restrictions depending on the POE budget and actual power. The feature restrictions and order can be programmed.

Operating the AP with single or dual 802.3af (class 3 or lower) POE source is not supported.

MOUNTING

AP-270-MNT-V1
AP-270-MNT-V2
AP-270-MNT-H1
AP-270-MNT-H2

MECHANICAL SPECIFICATIONS

Dimensions/weight (excluding mount):

24 cm (W) x 24 cm (D) x 27 cm (H)

9.4″ (W) x 9.4″ (D) x 10.6″ (H)

2.5kg/5.6lbs

ENVIRONMENTAL

Operating conditions

Temperature: -40°C to +65°C (-40°F to +149°F) with full solar loading

Humidity: 5% to 93% non-condensing internal

Rated for operation in all weather conditions

Storage and transportation:

Temperature: -40° C to +70° C (-40°F to +158°F)

Operating Altitude: 3,000 m

Water and Dust

IP66/67

Salt Tolerance

Tested to ASTM B117-07A Salt Spray 200hrs

Wind Survival: Up to 165 Mph

Shock and Vibration ETSI 300-19-2-4

REGULATORY

FCC/ISED

CE Marked

RED Directive 2014/53/EU

EMC Directive 2014/30/EU

Low Voltage Directive 2014/35/EU

UL/IEC/EN 60950

EN 60601-1-1, EN60601-1-2

For more country-specific regulatory information and approvals, please see your Aruba representative.

REGULATORY MODEL NUMBER

AP-575EX: APEX0575

CERTIFICATIONS

CB Scheme Safety, cTUVus

UL2043 plenum rating

Wi-Fi Alliance certified 802.11a/b/g/n/

Wi-Fi Alliance certified Wi-Fi 6 (802.11ax)

Wi-Fi CERTIFIED™ ac (with wave 2 features)

Passpoint® (Release 2) with ArubaOS and Instant 8.3+

Class 1 Div 2

ATEX Zone 2

WARRANTY

Limited Lifetime Warranty

Minimum Software Versions

ArubaOS & Aruba InstantOS 8.7.0.0