Ruijie RG-AP730-L Access Point

Specifications

Radio

RF

2.4GHz: 2 x 2MIMO

5GHz: 2 x 2MU-MIMO

Operating Bands

802.11b/g/n: 2.4 GHz to 2.4835 GHz
802.11a/n/ac: 5.15 GHz to 5.35 GHz, 5.47 GHz to 5.725 GHz, 5.725 GHz to 5.85GHz
(Depending on which country the AP is installed)

Transmission Protocol

Support concurrent 802.11ac and 802.11 a/b/g/n.
Supports 2.4G + 5G +5G

Spatial Streams

2.4G supports 2 spatial streams, 5G supports 2 spatial streams

Access Rates

2.4GHz: up to 300Mbp
5GHz: up to 867Mbps
Total: up to1167Mbp

Maximum Transmit Power

≤100mw (20dBm)
(Depending on the country of use, laws and regulations.)

Modulation

OFDM: BPSK@6/9Mbps, QPSK@12/18Mbps, 16-QAM@24Mbps, 64-QAM@48/54Mbps
DSSS: DBPSK@1Mbps, DQPSK@2Mbps, and CCK@5.5/11Mbps
MIMO-OFDM: BPSK, QPSK, 16QAM , 64QAM and 256QAM

Dimensions (W x D x H)

230 mm x 230 mm x 47 mm (Only host, excluding the bracket)
(9.06in x 9.06in x 1.85in)

Weight

1.3 kg (Host and bracket)

Receive Sensitivity

11b: -96dBm(1Mbps), -93dBm(5Mbps), -89dBm(11Mbps)
11a/g: -91dBm (6Mbps), -85dBm (24Mbps), -80dBm (36Mbps), -74dBm (54Mbps) 11n: -90dBm@MCS0, -70dBm@MCS7, -89dBm@MCS8, -68dBm@MCS15
11ac HT20: -88dBm (MCS0), -63dBm (MCS9)
11ac HT40: -85dBm (MCS0), -60dBm (MCS9)
11ac HT80: -82dBm (MCS0), -57dBm (MCS9)

Transmit Power Adjustment

1 dBm

LED Indicators

1 LED (red, green, blue, orange, and blinking modes, blinking mode for smart device access,
and the indicator can be switched off to silent mode)

Power Supply

Adapter: DC 48V/0.6A (optional)
PoE+: IEEE 802.3at

Antenna

Built-in smart antenna

Power Consumption

Maximum: 25.5W

IP Rating

IP41

Temperature

Operating: -10°C to 50°C (14°F to 122°F)

Storage: -40°C to 70°C (-40°F to 158°F)

Humidity

Operating: 5% to 95% RH (non-condensing)

Storage: 5% to 95% RH (non-condensing)

MTBF

>400,000H

EMC Standard

GB9254
EN301 489
EN 50155
EN 50121
EN 55032
EN 61000
EN 55035

Service Ports

One 10/100/1000BASE-T Ethernet port (PoE-capable)

Management Ports

One Console port

Button

One Reset button

Installation

Ceiling/wall mount

Safety Standards

GB4943
IEC 60950-1

Vibration Standards

IEC61373

Radio

China Radio Transmission Equipment Type Approval Certificate
EN300 328
EN301 893

LED Indicators

Fit AP

State

Frequency

Meaning

Off

N/A

The AP is NOT receiving power. Or the AP is in Do Not Disturb mode, which can be disabled by software.

Blinking green

3Hz

uBoot program initialization in progress

Blinking red

3Hz

Initialization is complete, but no Ethernet activity.

Blinking blue

3Hz

Normal operation, at least one wireless client is associated with the AP.

Solid blue

N/A

Normal operation, but no wireless clients are associated with the AP.

Solid green

N/A

Main program initialization in progress

Solid orange

N/A

Initialization is complete, and the AP is establishing a CAPWAP connection with an AC.

Blinking orange

3Hz

Firmware upgrade in progress. Do not power off.

Double blinking red

3Hz for 2 cycles and off for 2 cycles

Locate the AP.

Reset button

Pressed for 2s or less

Restart the device.

Pressed for 3s or more

Restore default settings.

Fat AP

State

Frequency

Meaning

Off

N/A

The AP is NOT receiving power. Or the AP is in Do Not Disturb mode, whichcan be disabled by software.

Blinking green

3Hz

uBoot program initialization in progress

Blinking red

3Hz

Initialization is complete, but no Ethernet activity.

Solid blue

N/A

Normal operation, but no wireless clients are associated with the AP.

Solid green

N/A

Main program initialization in progress

Blinking blue

3Hz

Normal operation, at least one wireless client is associated with the AP.

Reset button

Pressed for 2s or less

Restart the device.

Pressed for 3s or more

Restore default settings.

Gas

Average (mg/m3)

Maximum (mg/m3)

SO2

0.2

1.5

H2S

0.006

0.03

NO2

0.04

0.15

NH3

0.05

0.15

Cl2

0.01

0.3

Temperature

-10°C to 50°C (14°F to 122°F)

Relative Humidity

5% to 95%

Maximum diameter (μm)

0.5
1
3
5

Maximum concentration (Particles/m3)

1.4×10^7
7 x 10^5
2.4 x 10^5
1.3 x 10^5

Power Supply

Internal Diameter

1.35mm

External Diameter

3.5mm

Depth

6.4mm

Polarity

Internal: positive

External: negative

Installation Tools

Common Tools

Phillips screwdriver, related copper and fiber cables, bolts, diagonal pliers, cable ties

Special Tools

Wire stripper, crimping pliers, RJ-45 crimping pliers, punch down tool

Meter

Multimeter, bit error rate tester (BERT)

Unpacking the Access Point

Package Contents Items

Verify that all parts are installed and debugged.
Screws
Mounting brackets
Product quick installation guide
Packing list